How to Install WooshBuild Infinity in Zgemma and Enigma 2 Boxes

How to Install WooshBuild Infinity in Zgemma and Enigma 2 Boxes

WooshBuild Infinity has removed need for individual images for each box. You can install on any box without using any USB. WooshBuild Infinity will work on all Enigma2 boxes whether satellite, cable or IPTV Only, old or new.

Please make sure your box got OpenATV firmware installed. All new boxes already come with OpenAtv firmware.

[ If you don't have  OpenATV then u can download from here CLICK HERE
>After downloading you need to unzip/Extract it and transfrer to a fully formatted USB stick. 
>Power off the box
>Insert that USB stick to USB port behind the box
>Turn On the box and Press and Hold front Power (silver) Button until it show USB on box screen.
Now OpenATV will install automatically. ]

Now time to install Wooshbuild Infinity....

1st >  Connect your box with TV, internet, satellite and cable(if it is a combi box),power on the box. 

2nd > After switchingthe box on obtainthe IP address of the box. You can get itfrom box network menu or from the broadband dashboard. (Looks like 192.168.x.x)

3rd > Open internet explorer on you computer and type the IP address of the box in address bar.For example if IP address of your box is 192.168.0.12 type it exactly as in the picture below: 

 4th > Once you have Webif open in your browser, scroll down on the left and click the word Terminal

 5th > Type the word root and press enter. 

6th > Then type the following command at the prompt and press enter:

          opkg install http://wbuildx.co.uk/setup.ipk

 7th >  You will see the following:

Your box will restart and you will be able to use your remote to configure your box.